BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Mask made of very comfortable, high-quality rubber. Antifog visor made of polycarbonate, provides wide field of vision (80 %). Speec h is conveyed via the speech membrane, which provides clear speech transmission. The exhalation valve is located at the lowest point of the mask and has a large diameter, which results in low exhalation resistance. The headband is easily adjustable, includes a car ry strap for hanging the mask around the neck. Features click connection for demand valve with quick-coupling Automaxx-AS.
Replacement hood for breathing hood S-855E in PU coated polypropylene for less pilling and more durability. Visor made of Polycarbonate. Hood with neck and shoulder protection. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. Replaces hood HT-121 and HT-125 with article numbers 1002486 and 1002491. Weight: 375g. NPF: 500 when used with Jupiter motor unit. 200 when used with compressed air. Universal size.
Anti static rubber 20m hoses offering outstanding aging qualities and longservice life. Resistance to sparks and scorching.CEJN safety couplings that are quickand easy to connect yet prevent accidental disconnection. In line whith: EN14593, EN14594
PVC hoses offering outstanding aging qualities and long service life. Resistance to sparks and scorching.CEJN safety couplings that are quick and easy to connect yet prevent accidental disconnection.
Screw filter A2P3 in plastic housing with standard thread connection DIN EN148-1. Suitable for protection against organic gases and vapours, such as solvents with a boiling point higher than 65°C, solid and liquid particles of toxic substances, radioactive substances and micro-organisms such as bacteria and viruses. These RSG filters are designed to provide exceptionally low breathing resistance and high comfort for extended use. The standard threaded connection ensures that they are also compatible with RSG's T-air motor unit and all masks with a standard threaded connection. Compliant: EN14387
Intrinsially safe motorunit specially designed to be used in potential explosive atmospher, to be used with Sunström hoods and face masks. Device is equipped with a low-flow visual and auditory alarm and electronics for maintenance. Comes with: motorunit, battery, charger ,belt, filter adaptors for P3 filters, set P3 filters, 10 pre filters, filter cover caps, tube vaseline, and flow meter.Not for confined spaces. Flow rate: min. 175 or 225 L/min. .Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h. NPF: dependent on the mask used.
Radiant heat cover to cover head and shoulders for airhoods M-300.
Comfortable half mask in TPE with replaceable A1P3filters . Sizes: S/M and M/L.
Comfortable half mask in TPE with integrated and replaceable particle filters. for anti-odour protection against nuisance odour, dust, all types of fumes, oil and water mists and micro-organismes. Light weight, silicone and latex free. Sizes: S/M and M/L.
Comfortable half mask in TPE with replaceable A2P3filters . Sizes: S/M and M/L.
Plastic ABEK2HgP3 combination filter EN18 standard thread for protection against organic and inorganic gases and vapours, sulphur dioxide and hydrogen chloride, ammonia and organic ammonia derivatives, and particulates.
Self-rescuer, compact, lightweight and ergonomic. Can be worn on the body or mounted on the wall in a waterproof box. Is used to escape from a lack of oxygen, but also against toxic gases and particles and provides the user with oxygen for 15 minutes. Operation based on a small compressed air bottle which adds 02 to expired air. Delivery in orange storage box. Belt sold seperately as an accessory. 15-year life cycle.
Output for 3 persons / compressed air hoses to be installed on Aircare filter system.
Glass replacement lens for shot blasting helmet Panorama. Serves as the basic lens.
Fire-resistent seal for the head shell as accessory of hoods M-106, M- 107, M-306, M-307. No PPE.
Air supply system for use with compressed air line in combination with 3M half-face or full face masks. Also makes it possible to mo unt filters on half-face or full face masks for situations in which supply from compressed air line is cut off or for protection und er a decontamination shower. If no filters are mounted, overpressure valves C-340 must be installed (these are provided). Only appro ved in combination with air hoses C-251, C-252 and C-253. Fitted with air regulator for adjusting the flow rate. Not for use in conf ined spaces. Working pressure: between 3 and 7 bar. NPF with half-face mask: 50, NPF with full face mask: 200.
Escape hood on compressed air for very toxic conditions and/or places where can be a lack of oxygen. The escape mask consists of a hood with an integrated rubber half-mask. The bag contains a 3 litre, 200 bar metal filled air cylinder. As soon as the bag is opened, the breathing air is automatically activated. While wearing the mask, the user sees a continual indication of the amount of escape time that remains. Bag can be used to carry escape set while it is closed or opened. Working time: at least 15 minutes. Weight: 6 kg. Flow rate: approx. 35 l/min.
Air cooler with neoprene cover on belt for use in combination with 3M airhoods with bayonet coupling. With regulator to adjust the airflow and temperature in the air hood. Can cool air a maximum of 28 °C. For use with compressed air hoses with max. length of 10 m. Brass warning whistle indicates when air flow is potentially too low. Hose to rubber of PU hood not included. All usable buttons are blue. Inlet pressure: 4 - 8 bar. Minimum airflow 170 l/min, max. 500 l/min.
High-pressure pressure reducer for 200 and 300 bar compressed air cylinders with one manometer that indicates the pressure in the ai r cylinder and another manometer that indicates the pressure in the connected compressed air line. Includes a whistle signal that wa rns when the cylinder is almost empty. Ideal for monitoring a 50-litre compressed air cylinder that can serve as an air supply or as an air buffer when using compressed air equipment. Pressure reducer with one connection for compressed air hose with straight CEJN coupling.
NOCOP3 screw-on filter DIN 148 in aluminium housing. Protects against nitrous gases, plus toxic dust, vapour and smoke particles. Only for usewith full face masks with standard threads.
Rubber hose with female and male standard threaded connection EN 148-1. Connects between filter and mask. Allows filter to be worn on the hip (in combination with separately supplied belt 1002677).
Dust mask, class P2, for harmful dust. Form-retaining mask thanks to Dura-Mesh shell on the outside of the mask. Ensures that themaskalwaysretains its shape, even when worn for extended periods or after folding the mask. The pleated filter technology reducesbreathingresistance to 50%. Reusable. Fitted with non- adjustable, elastic headbands with closure. Packed per piece. NPF: 10. 149:2001.
Sweat band for air caps, S-133, S-333, S-433 and S-533.
Disposable S-922 visor protectors (tear offs) for breathing hood S-600, S-700 an S-800. Prevents wear and damage of the visor.
Lightweight breathing hood made of WEB 24 with PE visor. Hood with double neck and shoulder protection so the inner hood can be tucked inside the clothing. Designed with innovative air guide that allows air to blow through 2 or 3 openings. Air channel leads to the visor to prevent it from fogging. Hood can be replaced separately. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light spray painting applications or dusty environments. Weight: 310 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air.
Welding helmet from the 9100 series in durable, lightweight material. Good protection of ears and side of neck, and better coverage of the throat against heat and welding sparks. To be combined with Adflo or V-500 regulator. With hinged visor. Cassette not included.
AB2 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >65 °C. Can be used in combination with half and full face masks with standard threads. Class 2 gas filter: for max. concentration of 0.5 %.
High quality filter system that converts compressed air to breathing air in line with the European standards. Must always be installed between compressed air source and user of compressed air hood or mask. Includes two filters: AK filter for odours and taste and SMF filter to separate oil, water and dust. Pressure reducer with gauge eliminates any pressure fluctuations from the compressed air line. Regulator allows you to adjust average pressure to the hood or mask you are using. Can supply breathing air for up to three people. Weight is approx. 2.6 kg. Capacity: output is adjustable between 0 and 10 bar Input pressure min. and max. between 4 (1 user) and 10 bar (3 users) Suitable for wall mounting. Can be ordered with 3 way 1002713 and 1014794 output clutches. For use with compressed air hoses with maximum length of 10m.
Face seal for 9100 MP hoods. Not seperately certified as PPE.
Evacuation hood with full-face mask in overpressure, for potentially high concentration gas leaks, no degradation of components by H2S, on compressed air 2L-filled composite bottle, working time 15 min. Can be used in the event of oxygen deficiency. Can be maintained. Weight: 4.7 kg.
Replacement hood T-airline Chem 3 (x2)
Adjustable head harness with contoured air duct, aiflow indicator and sweatband for T-Airline 1000 Hoods
3M™ Versaflo™ BT-63 Length Adjusting Breathing Tube is designed to be used with 3M™ Full Facepiece Respirators 7907 S Series, 6000 Series, and half face masks 7500 Series and the 3M™ Versaflo™ Powered Air Purifying Respirator TR-600 and TR-800.
Escape hood offers protection for escape from chemical-polluted environments, it has a duration of 15 minutes and is a disposable de vice, to be disposed after use. It comes in a universal size. The bag is made of antistatic fabric with belt loops, ring for wall application and side rings for shoulder use. Te orange fluo hood is sealed in a vacuum bag and equipped with a wide panoramic anti-fogging visor, and elastic self-adjusting harness with an elastic tight collar. The silicone halfmask is anatomically shaped and designed ot fit perfectly. Version with ABEK CO P filter for protection agiainst CO and from vapours and mists that may originate in case of fire, dusts, fumes and mists, and organic and inorganic gasses and vapours, sulphur dioxide, hydrochloric acid and other gases, ammonia ant its derivates, as well as dusts, fumes and mists. Suitable for use in ATEX environments.
P3 filters with high-resistance shell, with bayonet connection for mask Medopair II. Offer excellent protection aginst solid and liquid particles such as dust, fumes, aerosols. In linet with: EN143
Comfortable combination safety goggle and half mask in TPE with replaceable ABEK1P3 filters. For protection against most organic and arorganic gases and vapours, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivates, toxic dust, vapour and smoke particles metal fumes, mists and micro-organisms. Sizes: S/M and M/L.
Comfortable half mask in TPE with replaceable ABE1P3filters. For protection against most organic and arorganic gases and vapours, sulphur dioxide, acidic gases and vapours, toxic dust, vapour and smoke particles metal fumes, mists and micro-organisms. Sizes: S/M and M/L.
Breathing apparatus M1 basic with fixed lung demand valve, and basic backplate, harness without padding, classic line, manometer. To combine with masks 3S Maxx, or G1 Maxx, and for use with 6L(6,8L)/300BAR cilinders. Weight without ciilinder: ca 4,63 kg. working time: ca 45 min. NPF: 50.000.
Protects against sulphur dioxide, acidic gasses and vapours. For use in combination with a half or full face mask with standard threads. Class 2 gas filter for maximum concentraiton of 0,5%.
Oil and chemical resistant compressed air hose with a diameter of 10/16mm made of polyester reinforced with PVC, fitted with safety couplings CEJN 342. For use with the SR99-1 filter unit.
Foldable mask, class P2, New Generation for harmful dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. With handy lips to unfold the mask easily.Fitted with non-adjustable, woven elastic headbands. Improved Cool Flow Comfort exhalation valve provides even lower exhalation resistance and lower levels of CO2 and moisture in the mask. Masks packed separately. This mask does not contain components of rubber latex or PVC.NPF: 10.
K1 filter in plastic housing for 3M half and full face masks. Protects against ammonia and organic ammonia derivatives. Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust filter holder 501 is used. Class 1 gas filter: for max. concentration of 0 .1%.
Wire mesh visor for Commander shot blasting helmet. To be placed between basic glass lens and PC lens for added protection.
Odour filter that removes unpleasant odours. Does not provide protection from gases or vapours, only improves comfort. If gas filter s are already being used, it is unnecessary to use an odour filter. Can be used in combination with the Adflo motor unit. Suitable f or: processes involving chemical risks.
Speedglas braces compatible with the Caterpillar Compact Air and Barisoft belt.
Belt for attaching hose to mask. In combination with hose with standard threaded connection, the filter can be worn on the hip to avoid high concentrations at filter input point during certain activities, e.g. opening a vat.
Visor protectors for mask TR-82/TR-2002 (BRK 820). Visor protectors made of acetate that protect visor against scratches and spatters.
Blue compressed air hose, 30 m, rubber. Can be used for applications such as making a connection from a compressor to a breathing air filter unit and from filter unit to a belt with a coupler or regulator. Male and female CEJN safety quick-coupling to be supplied separately.
Output for 2 persons / compressed air hoses to be installed on Aircare filter system.
Bitter test liquid for performing fit test. Content: 55 ml.
Y-piece for installation on compressed air hose, with one male and two female couplings. With non-return valve, makes it possible to split 1 hose into 2 hoses. Fitted with Rectus 96 couplings (NOT compatible with Rectus 96 short of lung demand valves).
Carrying case for Ultra Elite masks. Equipped with a handy shoulder strap. Ideal for the filter and mask to protect against dust. Dimensions: 318mm x 180mm x 232mm.
Lightweight breathing hood made of WEB 22 with PE visor. WEB 22 material captures paint particles, preventing the paint particles on the wearer from getting onto the work piece. Hood with double neck and shoulder protection so the inner hood can be tucked inside the clothing. Designed with innovative air guide that allows air to blow through 2 or 3 openings. Air channel leads to the visor to prevent it from fogging. Hood can be replaced separately. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For spray painting applications, special raw material of hood and visor can be cleaned with thinner. Weight: 315 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air.
-Case on wheels -For breathing apparatus, 6,8L cylinder, mounted mask and demand valve -Outer dimensions: 700x300x520mm -Weight: 4,8 Kg
Closet for breathing apparatus with one cylinder (up to 6,8l), aparatus can be put in the closet ready for use. For mural fixation. Dimensions: L:89cm,W:49cm,H:35cm. Weight: 5,7kg No PPE.